Page 1 of 1
Turbo mustang project. damn expensive
Posted: Mon Nov 26, 2007 10:12 pm
by Darkhelmet
I guy I have some dealings with asked Jeff and I to build up his mustang with a stroked engine and carb turbo set up. Before I started pricing everything out I didn't think this would be a a very expensive venture , boy was I wrong.
The engine alone is going to cost $7000 for a 434 dart block stroker.
the guys budget was 10k, I come up with a minimum of 16k to get it together and running. I'm a little nervous undertaking this being that I've never dealth with carb turbocharging. has anyone here ever dealt with it?
Re: Turbo mustang project. damn expensive
Posted: Mon Nov 26, 2007 10:15 pm
by vr4
you can do draw thru or get a special pressurized carb.
Re: Turbo mustang project. damn expensive
Posted: Mon Nov 26, 2007 10:24 pm
by Darkhelmet
we were looking at the pressureized carb option. still looks like a damn sloppy way of fuel control. for 3k we could set him up with an edlebrock port fi system.
Re: Turbo mustang project. damn expensive
Posted: Mon Nov 26, 2007 10:33 pm
by vr4
alot of guys are scared away from efi even though its 10000000000% better than carb.
i would personally push for efi.
Re: Turbo mustang project. damn expensive
Posted: Tue Nov 27, 2007 1:32 am
by moffman93'
why are you buying a new motor? Just build up the stocker. its still going to get very pricey. Rods, stroker crank, pistons, springs, push rods, valves, turbos, manifolds, intake mani, its not going to be cheap.
Re: Turbo mustang project. damn expensive
Posted: Tue Nov 27, 2007 1:36 am
by vr4
[quote=""moffman93'""]why are you buying a new motor? Just build up the stocker. its still going to get very pricey. Rods, stroker crank, pistons, springs, push rods, valves, turbos, manifolds, intake mani, its not going to be cheap.[/quote]
the stock 302 blocks dont handle much for power.
Re: Turbo mustang project. damn expensive
Posted: Tue Nov 27, 2007 5:13 am
by TajMan
On bikes you can take steps to seal carbs and make them adequate for running pressurized.
Re: Turbo mustang project. damn expensive
Posted: Tue Nov 27, 2007 2:14 pm
by Jeff V.
the guys budget was 10k, I come up with a minimum of 16k to get it together and running. I'm a little nervous undertaking this being that I've never dealth with carb turbocharging. has anyone here ever dealt with it?
You have fun with that. I'm not comfortable working with that kind of money on something we're totally inexperienced with for someone we do not know.
Re: Turbo mustang project. damn expensive
Posted: Tue Nov 27, 2007 2:32 pm
by Chris95RT
What happened to Jesse's v6? Did he sell it? (I thought this would be for this guy).
Re: Turbo mustang project. damn expensive
Posted: Tue Nov 27, 2007 8:19 pm
by Jeff V.
What happened to Jesse's v6? Did he sell it? (I thought this would be for this guy).
Yeah, he sold it a while ago and got an 08 Mustang GT.
His V6 was fuel injected

Re: Turbo mustang project. damn expensive
Posted: Tue Nov 27, 2007 8:47 pm
by vr4
[quote=""Gatecrasher""]Yeah, he sold it a while ago and got an 08 Mustang GT.
His V6 was fuel injected

[/quote]
so this guy wants to put a carbed motor into an 08?
where is he so i can smack the shit outta him?
Re: Turbo mustang project. damn expensive
Posted: Tue Nov 27, 2007 8:57 pm
by Jeff V.
so this guy wants to put a carbed motor into an 08?
No, we're talking about a different guy.
Re: Turbo mustang project. damn expensive
Posted: Tue Nov 27, 2007 9:07 pm
by vr4
[quote=""Gatecrasher""]No, we're talking about a different guy.[/quote]
ok good. dont confuse me like that. i know its easy to but still.
