BAWC Forums

My92Stealth: You asked bro lol Here is the list and trust me it's gotten bigger since I wrote this a month or two ago lol:

Mod List:
Exterior Mods:
C-West Front Facer
C-West Rear Bumper
Re-Amemyia AD2 Side Skirts
Re-Amemyia AD2 Rear Diffuser
Re-Amemyia AD2 Exhaust Gaurd
Re-Amemyia Super-G N1 Hood
APR Carbon Fiber GTII Fully Adjustable Spoiler
APR Carbon Fiber GTII Mirrors
APR Carbon Fiber GTII Cannards
APR Carbon Fiber Door Trim
Evo-R Sleek Headlight Kit
Evo-R Front Skid Plate
Hella Pro HID DE Xenon Kit x 2
Nukabe Front Tow Hook (annodized red)
Nukabe Rear Tow Hook (annodized red)
Cusco Rear Trans Support
Sparco Gas Door Molded into the car
Brand new 4 stage paint. Two-tone paint job. Colors= Mazda Speed Red w/metalalic flake and Matte Black. Less then 3 months old.
Ro_Ja Dark Gunmetal 18" Wheels w/ 40mm offset and 2" polished Lip
Dunlop 275/40/18 Sport Max 9000
Dunlop 245/40/18 Sport Max 9000

Interior Mods:
PLX Devices DM-5 Wideband Air/Fuel Gauge w/ Module
PLX Devices DM-100 4-way Fluid Temp Gauge w/Module and sensors
PLX Devices DM-100 EGT w/Module and sensor
Auto Meter Nexsus 30/30 Boost Gauge w/datalogging module and remote
Auto Meter Nexsus Oil Pressure Gauge w/datalogging module and remote
Auto Meter Nexsus Fuel Pressure Gauge w/datalogging module and remote
Auto Meter Nexsus Control Unit w/datalogging module and remote
Auto Meter Tripple Gauge A-Piller
FlyRX7 Center Mount Tripple Gauge Pod (SUPER RARE)
Sparco Lap 5 Steering Wheel
Takata 5point Harness
Takata 5point Harness (Passenger and Driver)
Takata Shoulder Protectors/Pads X 2 (Passenger and Driver)
Greddy Turbo Timer
Greddy Gspeed Counter-Weighted Shift Knob
Greddy Prospeed Pedals
Pettit Racing Short Shifter
Apexi Power FC Commander w/holder
Carbing Carbon Fiber Dash Cluster
Akirtida Custom Cut Din Plate
Nakamechi 6 Disc headunit (Single Din)
Rainbow Audio Componets

Engine Mods:
Garrett GT35/40R Dual Ballbearing Turbo
HKS Standard Wastegate w/10psi spring
HKS Carbon Ti Muffler
HKS Air Filter
Racingbeat 3" Downpipe
Racingbeat 3" Midpipe
Racingbeat 3" Catback
Yakada FD3 FMIC Kit
Denso 1300cc injectors (Secondaries)
Denso 850cc injectors (Primaries)
Greddy Profec B 2
Greddy Type-S Blow Off Valve
Fluidyne Race Radiator
Fluidyne Dual Oil Coolers
Fluidyne Trans Cooler
Torsen LSD 4.1 gearing
Pettit Racing Coolcharge Kit
Pettit Racing Heat Wrap
Pettit Racing Turbo Jacket
Brembo Cross-drilled and Slotted Rotors
Walbro 255lph In-Tank Fuel Pump
Walbro 255lph In-Line Fuel Pump (Running Dual Pumps)
Apexi Power FC Stand Alone Engine Mangement System
Apexi HKS Twin Power
Fuel Labs Adjustable Fuel Presure Regulator
KGY Fuel Rails
NGK Monster Wires
NGK Plat. Plugs (9's all around)

Plus a ton of other stuff I didn't bother to list.

That's impressive

I asked for motor mods, not the whole thing


Just kiddin. Out of curiosity, have any numbers?

The new engine swap will be done next weekend. Then break in tune and then race tune. Break in is about 300-400 miles on a rotary.

My old engine was putting out close to 400-450hp this new one should be up into the 600's.

That is a gorgeous FD dude, I really love those cars.

numbers are all that really matters.

Badass rotary, all the same.

i like everything except for the cannards. but you have a clean car. and i dont get the whole 2 sets of headlights thing, it doesnt look that bad but its just odd...

Awesome mod list. Can't say the exterior appeals to me, but each to their own right. 600 + hp to that thing will be more than a slight handful!

Scotty

There are foglights and headlights. The headlights are small projectors which are regular headlights and brights so you have to have two sets in there. Thats the only thing they make for the sleek headlight kit.

As far as the cannards go...the car is somewaht of a show car as well. Those things draw a rediculous amount of attention and points. I feel you guys on what your saying though.

Looks nice!

Thanks bro

Nice looking car. Nice list of mods as well.