Page 1 of 3

What am I missing

Posted: Mon Oct 11, 2010 3:17 pm
by DCIV
My windshield wipers dont work and I think I have tried everything. I have a known good wiper arm (thing in the car) that I swapped from my other vr4, I can hot wire the motor so its good, and the fuse under the dash is good....what am I missing?


Coop

Re: What am I missing

Posted: Mon Oct 11, 2010 3:35 pm
by BillyC
Wiring, column stalk or ETACS.

Re: What am I missing

Posted: Mon Oct 11, 2010 3:38 pm
by DCIV
etacs.....hmmm didnt think of that one. I dont know how the wiring would be messed up, not like thats something to splice or anything.


Coop

Re: What am I missing

Posted: Mon Oct 11, 2010 4:08 pm
by BillyC
I don't know what year your car is, but here is the etacs diagram via stealth316 out of the 91 service manual he has uploaded.
http://www.stealth316.com/images/stim/tim_08-30.gif

Re: What am I missing

Posted: Thu Oct 14, 2010 10:27 pm
by BillyC
well...did you swap out the etacs?

Re: What am I missing

Posted: Fri Oct 15, 2010 12:15 pm
by DCIV
I didnt get a chance to swap out etacs...just not looking forward to where it is on the car. Did find out that my rear wiper doesnt work either....makes me think etacs just a little more.


Coop

Re: What am I missing

Posted: Mon Mar 14, 2011 2:25 am
by DCIV
Ok I am at the end of my rope with this. How do I hotwire the windshield wipers correctly and preferably to the stock switch. I realize I will only have one speed but I dont care if its MSPAINT. I need to know how to do it correctly.


Coop

Re: What am I missing

Posted: Mon Mar 14, 2011 7:21 am
by vr4
well what have you done? did you find a known good etacs unit?

Re: What am I missing

Posted: Mon Mar 14, 2011 2:46 pm
by DCIV
yup, I have a full working 93 parked right behind it. swapped out the etacs, switch, motor can be hotwired, and even put in a new fuse. As I understand it thats everything that could go bad. Is there anything else?


Coop

Re: What am I missing

Posted: Mon Mar 14, 2011 4:56 pm
by vr4
Wiring...

Get out the ohm meter and start checking.

Re: What am I missing

Posted: Mon Mar 14, 2011 6:50 pm
by vr4
Image
Image

Re: What am I missing

Posted: Mon Mar 14, 2011 7:12 pm
by DCIV
I wish any of that made sense to me.


Coop

Re: What am I missing

Posted: Fri Oct 30, 2015 2:23 am
by DCIV
So....the same time the wipers quit working I did the battery relocation and ditched the sprayers.

This thread about his sprayers and then wipers quit working....is there anything that I need jump that would make it so I can test if that is my problem? http://www.3si.org/forum/f11/front-rear ... ng-738841/


Coop

Re: What am I missing

Posted: Sat Oct 31, 2015 2:16 am
by DCIV
So any volidity to this thought?


Coop

Re: What am I missing

Posted: Fri Sep 22, 2017 11:55 am
by DCIV
Damn. You all were right. Etacs. Working on it last night. Checked the etacs connector and they worked. Prob need a new etacs. Oh man. Wipers! No more fearing the condensation, the rain....yes!


Coop

Re: What am I missing

Posted: Sat Sep 23, 2017 2:41 pm
by BATMAN
Took you 7 years to consider an issue that was mentioned more than twice?

Can you say stubborn

Re: What am I missing

Posted: Sat Sep 23, 2017 4:53 pm
by DCIV
Well when it wasn't running when I asked. Then ran for 4 months and down again for 3. Yes. Stubborn only because I didn't think it would not work for wipers and work for everything else.


Coop

Re: What am I missing

Posted: Sat Sep 23, 2017 10:18 pm
by ChargerX3
Coop always listens to advice.





;)

Re: What am I missing

Posted: Sat Oct 05, 2019 10:27 pm
by DCIV
Quit working again. Did when the wipers got a HAIR of resistance. Swapped etacs and nothing. Hot wired them like before, they worked but will not go on the switch again.

Would blame the switch but rear wipers don’t work either.

Could I have a second bad etacs unit?


Coop

Re: What am I missing

Posted: Sat Oct 05, 2019 11:04 pm
by Chris GTO TT
Does the battery frequently die or run low?