BAWC Forums

[quote=""moffman93'""]I just do little things like cleaning[/quote]

wned:


he didnt even have to comment, lmao, it was that great...

1992 Acura Legend Sedan

Exterior:
New OEM Front Bumper
Clear Corners
Clear & Blacked Out Bumper Lights
Black Tails
3% Tinted Sunroof/Windows
One Piece Painted Mesh Grill
"Legend" 3rd Brake Light
Tilt mod
JDM Headlights
Shaved Trunk
Painted Moldings
LED Windsheild Sprayers (LOL)
"Rubber" Antenna
Mod Express H4H (Hi/Low) Bixenon Lights
Tinted side Mirrors

Interior:
Suede Headliner
Black Vinyl Pillars
Black Rear Deck
Black Carpet/ Floor Mats
Black Speaker Grills
Full Type-A Swap
100% Custom Gauge Cluster with Red needles and Reverse Indicator lights and more
AEM Wideband
MSD Knockbox
Apexi SAFC2
MOMO Steering Wheel
MOMO Shifter with Boot
MOMO Ebrake Handle with Boot
MOMO Steering Wheel Hub
Sparco Torino black leather race seats
LED interior (everything is LED as well as custom spots)
JDM Navi Trim
JDM Navi Digital Climate Control
"Alarm System"
3 Hidden Compartments
Black Switch Panels and Center Console
Front Seat Brackets
Hidden Switchs
OEM Fog light switch
Non Digital Climate Control to Digital Climate Control Swap


Audio/Video:
3 JL 12W6 v1 Subs
1 Rockford Fosgate Punch 150
2 Rockford Fosgate Punch 75
1 Rockford Fosgate Punch 45
6x9 JL TR690
78lbs of Stereo wiring
Alpine PXA-H701
Alpine RUX-C701
Alpine DVA-9860
Seas Excel 7" W18NX
Image Dynamic CD-1v3 Mini Horns
Big 3 (2/0ga)
4 rolls of Raamat EG with 6 yards of Ensolite
Power Accoustic 7" Widescreen Monitor
Stinger S200 Isolator
Optical Cable
PG Fused Distro Blocks
Modded XBOX
Custom Trunk/ Center Console
Custom Relay Setup for the TV
Back up Camera
Kenitik 2000 Battery

Engine:
Blackend Motorsports Engine Dampner
Optima Red Top 1000CA
CAI
NGK Plugs
All OEM Gaskets/Bearings
Type 1 Intake Manifold (Ported/Polished)
Type 1 Heads (Ported/Polished)
All Machining/Boring
"Opened" Throttle Body
OBX Headers
Lightweight Pulley Set
Custom 3" Exhaust
High Flow Cat
Ground Wiring
Raised Compression Pistons
K&N Air Filter
EGR Blocked
Painted Engine Plastics
High Performance Radiator
A/C Delete
New IACV
Poly Motor/Tranny Mounts
K&N oil Filter
Castrol GTX 5w30 Motor Oil
Castrol High Mileage Transmission Fluid
New Fuel Filter

Wheels/Tires:
2 sets Stock wheels. (Winter Set) Yokohama/ FireHarks (Race Set) BFG Drag Radials / Fate-o Tires
18" Wheels (3 sets)
225/40 R18 Tires Rikken Raptors (sp?)

Brakes/Suspension:
Hawk HPS Pads
Brembo Slotted Type 1 Rotors
Goodridge Stainless Steel Brake Lines
New Type 2 Front Calipers (Nugeon)
New Type 1 Rear Calipers (Nugeon)
Castrol GT LMA Brake Fluid
Front ADDCO Sway Bar
Rear ADDCO Sway Bar
MLS Copy Bar
Ksport Coilovers (first set ever made/sold)
Short Tie Bar
Long Tie Bar
Front OEM "Strut Bar" Solid Aluminum
New Raxles Axles
New Master Cylinder

91 Stealth TT
15g's, 580cc Injectors, 341FH Pump (Hotwired), Dejon Tool intake pipes, Blitz SBC ID w/ harness, Blitz Power meter, TMO datalogger, ATR (Downpipe, Cat, Exhaust), RPS Clutch, CFDS, SS Shifter, ACCEL 9mm Wires, NGK Plugs, EBC "Red Stuff" Pads, Stillen Rotors, Greddy Type-S BOV, HKS SMIC's, Toyo Tires, Poly Motor Mounts,SS Brake Lines, Gutted Pre Cats.

91 3000gt VR4
13gs, GT-PRO 1200hp fuel system, AEM Wideband, painted valve covers/intake manifold, HKS sidemounts... I know theres more I'm forgetting.

05 Pontiac Grand Prix
13 Inch rotor upgrade

01 ITR
Soon to come new shell haha
Engine- Toda built head, Comptech Full exhasut, upgraded pump, AEM CAI

Thats all I got, sorry for the legend's list I copied it from another forum.Funny how my daily gets more mods then my project cars.

[quote=""GreekPower""]1992 Acura Legend Sedan
[/quote]

pics? im interested to see the legend.

[quote=""aaronatstate""] I just want the sleeper look.[/quote]

To be honest, you probably should have picked up a different car if you wanted a sleeper look. You know, something that doesn't actually look like it's supposed to be fast. Like a station wagon or something.

91 stealth TT completely gutted. 2900 lbs FTW
stock 91 80k mile bottom end
stock 190k+ mile blown struts
busted front CV boots mod


AAM TD05 18G kit 1BAR actuators
AAM apexi skyline GTR core FMIC
AAM -6 fuel rails
AAM dual feed aeromotive A1000 fuel system (not yet installed)
dual pass radiator with dual FAL fans
silicone radiator hoses
ported heads+ DR high rev kit and oversize valves
pitroadM cams
denso 720s (soon to be tossed in favor of 1600s)
DR/titan bending downpipe
grey alcantera sparco milano seats
6pt. roll bar
fidanza FW + DXD clutch


97 VR4 full interior
stock 18" chromies
tein HA coilovers
stillen downpipe
k&n FIPK
sbc-iD
supra pump
blue top 450s
SAFC neo
ohio stainless short shifter

12.41@111 best trap 116


03 cobra convertable
2.93 pulley
kooks long tube headers
apten CAI
magnaflow 2.5" catback
billetflow diff brace

12.60@118

[quote=""tabasco122""]pics? im interested to see the legend.[/quote]










Those pics were before and after some mods I still have ALOT of stuff for it sitting in my room waiting for install.

[quote=""GreekPower""]
Those pics were before and after some mods I still have ALOT of stuff for it sitting in my room waiting for install.[/quote]

clean car. looks nice for an older dd.

Some of the mod lists remind me of T2 where you tell me the sizes of random bolts in the engine bay.

98 vr4 - IPS evo3 16g kit, aem ems, speed density setup, 94 TT engine harness, ACT 6 puck clutch, 680's, poopra pump hot wired, solid mounts, custom fmic w/apexi skyline core, custom intake pipes, extrude honed upper and lower intake manifolds, 65mm TB, stock engine/heads/cams, stillen dp, hks super dragger, intrax springs w/kyb shocks/struts, autometer nexus series gauges, TEC front strut bar, stock bolts in stock locations

92 galant vr4 - balance shafts removed, arp head studs, stock engine rebuild, switchable awd/fwd transmission, 4 bolt rear, kyb agx shocks/struts, eibach springs, 3 inch exhaust, copper exhaust mani gasket, act flywheel, competition 6 puck clutch, energy suspension front control arm bushings, prothane engine mounts, dsm shifter, official nickname "el blanco"

[quote=""Shawn96VR-4""]Some of the mod lists remind me of T2 where you tell me the sizes of random bolts in the engine bay.[/quote]

I was thinking the same thing. I tend not to post in threads like this for that reason. Shit every part on my car that shows wear gets replaced with a brand new item and if they make an upgrade it gets the upgrade. You should check out my fucking grade 10 black carbon steel bolts man. That shit puts T2 and T4 to shame.

[quote=""Shawn96VR-4""]Some of the mod lists remind me of T2 where you tell me the sizes of random bolts in the engine bay.[/quote]

i have a 13mm bolt head holding my alternator bracket on and another 13mm at the oil pump. i have sae bolts and nuts for my o2 housings to downpipe. testpipe but no catback. srs wiring completely removed. sound deadener removed. all exhaust body mounts removed. dash held in by 2 bolts. dash completely gutted.



would you like more details shawn?

see sig