BAWC Forums

As for hvac, I'll see if it does it again. The screen and buttons froze, but turning the knobs definitely adjusted temp even though it didn't indicate it.

https://www.corvetteforum.com/forums/c6 ... 1596029497

Like I said, crazy simple. Just need to jack up the back end and access it.

Tried some of that Meguiar's waterless wash and wax on lunch today. I think it came out good!

big fan of the ONR

https://www.amazon.com/Optimum-NR2010Q- ... B00D8DR0AO

add to bucket of water, drop in 3-4 microfibers, ring out, wipe, buff with a dry microfiber, as the rags get dirty grab a new one. i usually fold it over so i can use a different side each pass till the whole thing is dirty, but its been a decade since my car was clean enough to use that method lol.

These are tempting depending on condition. https://www.facebook.com/share/16SjZHeEvK/

I would lose some headroom, but as I lose weight I will gain it back. I should fit without a helmet and this is a pretty good price for C7 seats. Going to be on that side of the state the last week of July. If they still have them, I might pick them up.

Back country road. Not a prepped track. Street tires. Not dot legal slicks. Cold tires. Traction issues for sure.

0-60 mph = 4.4 sec
1/4 mile = 11.7 sec

Would be curious at a track with a set of these

https://www.discounttire.com/buy-tires/ ... -s/p/34446

Ended up ordering these: https://www.toyotires.com/product/proxes-r888r/

They come in this week. Install is on Friday. We will see if they are any better. Anything over 1/2 to 3/4 throttle in 1-3rd and I spin. And as my tuner said, spinnin aint winnin.

Duck Vader wrote: ↑Thu Jul 10, 2025 12:42 am Back country road. Not a prepped track. Street tires. Not dot legal slicks. Cold tires. Traction issues for sure.

0-60 mph = 4.4 sec
1/4 mile = 11.7 sec

good competition for my mudstain

I am hoping to get out to Pacific Raceways next month if I can. Hit a decent track and see what it really does. They have multiple test and tune nights so would be a good time to get things dialed in.

More than likely I'm going to try to get to pacific raceway for a test and tune night August 15th

You totally should. I'm excited what 1/4 and 60 foot you can pull. Hopefully its a super sticky track as well.

These should help.

Thats a good start. Dims?

Same as factory. 285/35/19. Can't go much wider until I get different wheels and wide body kit. Might have been able to go 295 but would only be like 0.4 inches wider and would be the limit on my current rims. These will only last 5000-7500 miles or so. But I'm only doing about 3000 a year on it. By the time I need to replace them I'll do widebody and get different wheels and can go up to 345s.

Stickier compounds help. I'm still on my factory all season tires. Ill likely go a similar route with a stickier tire, or maybe pick up dedicated drag strip tires.

Completely forgot that I had these sitting on the workbench. Quick little Saturday project.

Before





After

picture is so big i cant even tell what changed lmao

I usually only bawc on mobile so it's not huge lol.

Paddle shifters.

Holy crap, those are huge. How do I make them smaller? Something I can do on BAWC or do I need to edit them on Imgur?