Your dream project car(s)

[eljefefx]

Finally fixing my dad and I's 1926 Ford Model T that looks like this, somewhat. No brass.




You can have your high horsepower. I'll take old school

[aaronatstate]

[quote=""eljefefx""]Finally fixing my dad and I's 1926 Ford Model T that looks like this, somewhat. No brass.

You can have your high horsepower. I'll take old school [/quote]

Whats the engine code on that? Like 8?

[GreekPower]

[quote=""aaronatstate""]Whats the engine code on that? Like 8? [/quote]

I think you mean VIN haha.

either way still funny.

[My92Stealth]

I have this in the shop's backyard:



But no money to do anything with it...I'd love to redo the body in black and throw something massive under the hood...But once again I have no money :\

[Zentelis]

[quote=""eljefefx""]Finally fixing my dad and I's 1926 Ford Model T that looks like this, somewhat. No brass.




You can have your high horsepower. I'll take old school [/quote]

My dad had a Model A when he was 16. He spent one summer taking it apart, restoring it, and putting it back together, piece by piece. He told me it was the easiest car he had ever worked on

[eljefefx]

Yeah. There are lawnmowers now that are more complex than the flathead four.

[tabasco122]

71 challenger

2nd gen vr-4 with 16g setup, mint inside and out....

[eljefefx]

I'll try and get a decent picture of the T when I'm in San Antonio next.

[BleedScarlet]

[quote=""GreekPower""]Well I for one have been thinking lately that I should start my dream project car now well atleast one of them. Mine is:

A b16 or b18 fitted into a old school mini cooper.I wouldn't want some extreme power levels just like 450ish whp would more then suffice me. I have it all planned I just want to keep up with a few I've seen on youtube.

The only thing holding me back besides finding out how to do it and finding a LHD mini is my gf. She doesn't approve cause we can't have sex in it. Lame I know.

Videos for reference of what I speak of.
http://youtube.com/watch?v=gj3LmIuovYQ
http://youtube.com/watch?v=xqrk8bfosno&feature=related
http://youtube.com/watch?v=ioMx_N6jKZI&feature=related < I love how this car looks haha
http://youtube.com/watch?v=bFlClB6NFD0&feature=related
http://youtube.com/watch?v=GYuN0N2aq5g&feature=related < dyno
http://youtube.com/watch?v=M2ah1zl8cxw < beats a stang
http://www.youtube.com/watch?v=dLTi02uWXi8&NR=1 vtec vs non vtec mini
http://youtube.com/watch?v=tJA08eBFlWA for kicks a k20a supercharged mini
http://www.youtube.com/watch?v=ulIEs7DR ... re=related < minis on a track
and lastly a tastefully done mini http://www.youtube.com/watch?v=y8WlT3i719o
There's a guy who lives by me WITH that. It's pretty fuckin nasty, he whips around turns like nobody's business.

Personally, I hate small cars, but I'd still hop in his piece any day
Post your cars that you one day want to own/build with videos to [/quote]

[quote=""Caffinated Soap""]GTM, or a nice V8 RX-7.[/quote]
V8 RX-7?? I thought rotary motors are measured..differently? or something?
[quote=""Zentelis""][/quote]
hubba hubba
[quote=""tabasco122""]71 challenger

2nd gen vr-4 with 16g setup, mint inside and out....[/quote]
You sir have good tastes.
[quote=""eljefefx""]I'll try and get a decent picture of the T when I'm in San Antonio next.[/quote]
Please do




As for me?

I prefer 427 cubic inches of

[Barefoot]

[quote=""BleedScarlet""]V8 RX-7?? I thought rotary motors are measured..differently? or something?
[/quote]

Technically they are measure the same as any other engine, except instead of pistons, they have rotors

Rotarys are either 2/3/4 rotors with a 2 rotor being stock

What he is talking about it taking the rotary engine out and replacing it with a V8, cause the RX7 is one hot fucking car

[Barefoot]

My realistic dream project is a 1960 Chevy Vette. My dad took it apart before I was born, not sure why other than to rebuild the motor.. lol, but he ended up only rebuilding the motor and keeping the car stored since.

I want to build it back up with stock parts that we have, and then upgrade the suspension/brakes/trans and TT'ing it

I don't know if I will ever actually mod it past stock, but its a fun idea. Only problem with it is you can't actually read the VIN number on the frame due to surface rust.

[BleedScarlet]

[quote=""Barefoot""]Technically they are measure the same as any other engine, except instead of pistons, they have rotors

Rotarys are either 2/3/4 rotors with a 2 rotor being stock

What he is talking about it taking the rotary engine out and replacing it with a V8, cause the RX7 is one hot fucking car [/quote]

fucking cool!
[quote=""Barefoot""]My realistic dream project is a 1960 Chevy Vette. My dad took it apart before I was born, not sure why other than to rebuild the motor.. lol, but he ended up only rebuilding the motor and keeping the car stored since.

I want to build it back up with stock parts that we have, and then upgrade the suspension/brakes/trans and TT'ing it

I don't know if I will ever actually mod it past stock, but its a fun idea. Only problem with it is you can't actually read the VIN number on the frame due to surface rust.

[/quote]
fucking cool!

As far as modding past stock...
Don't.
Buy a C6 and have all the fun you want with that, this car should be reserved for vibrating the panties off the passenger.

[Wolf_Zero]

Twin Turbo 4-Rotor or 4-rotor prepped for 16K+ RPM in a GTM

[Jeremy C]

Just because it's been mentioned here...

Starion in Project Car Hell

You know which way I voted. I just realized that I've owned mine for over 1/3 of my life, now... This is bad.

[vr4]

careful with that vette. my aunts dad used to have 1. numbers matching everything and in pieces. garage burned down and in the end there was a nicely warped frame with fiberglass melted all around it.

[Caffinated Soap]

[quote=""BleedScarlet""]
...
As far as modding past stock...
Don't.[/quote]Oh hells no you didn't.



I want nothing to do with a stock RX-7. If I own one, this must be done. If I sold the working rotary, I'd probably make money installing a V8.

[stealthee]

Yuod have to find a working rotary engine first.

[Barefoot]

[quote=""vr4""]careful with that vette. my aunts dad used to have 1. numbers matching everything and in pieces. garage burned down and in the end there was a nicely warped frame with fiberglass melted all around it.[/quote]

Yikes. My dad has owned this one for over 25 years and is the second owner.. problem is that there is no VIN number on the column (that we can find) and the frame is surface rusted.. it should be numbers matching.. but we don't 100% know.

the fiberglass unibody is in perfect shape though, and the engine was rebuild 20 years ago and has been sitting wrapped up in plastic and still seems to be covered in the grease (or whatever they put on after a rebuild 20 years ago, lol).. so I have no idea what to think of its actual shape

It will be a fun project, just can't start working on it until my dad builds a garage at his house, and he can't do that until he closes the already open building permit..

[Barefoot]

[quote=""Caffinated Soap""]Oh hells no you didn't.

pic

I want nothing to do with a stock RX-7. If I own one, this must be done. If I sold the working rotary, I'd probably make money installing a V8. [/quote]

I think he was talking about modding the vette

Who wants a stock RX-7?

[GreekPower]

bleed what did you qoute me for? lol

I gotta say you all have some neat ideas interesting swaps