Re: This can only end poorly
Posted: Thu Dec 07, 2023 5:30 am
Looks like they arrived in good condition
Page 6 of 40
Re: This can only end poorly
Posted: Thu Dec 07, 2023 3:21 pm
Boxes themselves were pretty water logged and soft. The side in the picture was the only "dry" side. Didn't have a chance to open them up yet. Felt solid enough that things should be good. Plus stainless so even if wet, not a problem.
Re: This can only end poorly
Posted: Thu Dec 07, 2023 8:43 pm
Your car is looking really good. 
I see I'm not the only one who occasionally works in the garage in slippers.
I see I'm not the only one who occasionally works in the garage in slippers.
Re: This can only end poorly
Posted: Thu Dec 07, 2023 9:04 pm
That is pretty much all I wear in the garage. I hate wearing shoes and barefoot is a no no in the garage. I have inside slippers, outside slippers, and garage slippers. All the same brand and color.
Re: This can only end poorly
Posted: Thu Dec 07, 2023 9:05 pm
Do you all want a before/after video of exhaust?
Re: This can only end poorly
Posted: Thu Dec 07, 2023 9:15 pm
They say there is no such thing as a stupid question, but this is pushing it...in other words, absolutely you should.
Re: This can only end poorly
Posted: Thu Dec 07, 2023 9:30 pm
Re: This can only end poorly
Posted: Thu Dec 07, 2023 9:32 pm
Very nice looking!
Re: This can only end poorly
Posted: Thu Dec 07, 2023 9:58 pm
I’m more of a sandals and socks type when working on mine lately.
Coop
Coop
Re: This can only end poorly
Posted: Fri Dec 08, 2023 12:41 am
Very pretty.
Re: This can only end poorly
Posted: Fri Dec 08, 2023 2:25 am
Re: This can only end poorly
Posted: Fri Dec 08, 2023 2:33 am
I love the gif
Re: This can only end poorly
Posted: Fri Dec 08, 2023 3:18 pm
Factory exhaust removed.
Re: This can only end poorly
Posted: Fri Dec 08, 2023 3:20 pm
New vs old
Re: This can only end poorly
Posted: Fri Dec 08, 2023 3:46 pm
I'm interested to see how this sits under the car. It looks like the mufflers will be at an angle?
Did you have any problems getting the old ones out? When I did mine, I was sliding the tips on the ground even with my Quickjacks at full height. It was really close.
Did you have any problems getting the old ones out? When I did mine, I was sliding the tips on the ground even with my Quickjacks at full height. It was really close.
Re: This can only end poorly
Posted: Fri Dec 08, 2023 4:29 pm
Old ones came out easy. Hardest part was getting the hanger tool onto the hangers since they are tucker up under the rear bumper cover.
This is a 15 yr old car with 0 rust so all bolts came out like new and exhaust just slid apart.
Took out factory x-pipe first. Then undid the rear stabilizer bad and old mufflers just practically fell out with a ton of room. I was sitting under them so figure my thighs between them and the ground and still had room.
Put it some aftermarket heat shields and now just need to put new exhaust on. Might do it today or tomorrow. Not sure yet.
This is a 15 yr old car with 0 rust so all bolts came out like new and exhaust just slid apart.
Took out factory x-pipe first. Then undid the rear stabilizer bad and old mufflers just practically fell out with a ton of room. I was sitting under them so figure my thighs between them and the ground and still had room.
Put it some aftermarket heat shields and now just need to put new exhaust on. Might do it today or tomorrow. Not sure yet.
Re: This can only end poorly
Posted: Fri Dec 08, 2023 4:31 pm
And as for angle, yes they do. I'll get pics after I install them to show you.
Re: This can only end poorly
Posted: Fri Dec 08, 2023 7:35 pm
Well I couldn't wait until tomorrow.
Re: This can only end poorly
Posted: Fri Dec 08, 2023 7:36 pm
Looks like it fits perfect.
Coop
Coop
Re: This can only end poorly
Posted: Fri Dec 08, 2023 7:39 pm