I'm going to be selling it in the next few months most likely, so I'm interested to see what I should be expecting when I put it up for sale. I have a Word document of everything I've ever done, with general mileage and time of when it was done. I'll post that once I get home....I'm at work right now.
But as a general idea:
1992 VR4 with 104k miles
-13T turbos with about 150 miles on them
-DSM blue top 450cc injectors with about 700 miles after being cleaned/flow tested
-LS1 maf/maft
-Transmission rebuilt at 80k miles (I think, might have been 85k)
-NBT Quadco OS/Spool with about 150 miles on them (AdamVR4 reshimmed the tcase and all that)
-Main/rod bearings/thrust washers replaced at 90k miles
-Timing belt, VSS, water pump, oil pump replaced at 90k miles
-Gutted precats with ATR downpipe
-Hotwired walbro 255
-PLX M300 wideband
-Scanmaster 3
-SBC-id iii boost controller
-DSM side mounts
-DNP y-pipe
-KYB GR2s with S-Tech springs
-Maximal Performance adjustable rear control arms
-Maximal Performance solid motor mounts
-18x8.5 FN01RCs with BFG KDW2 tires (have to check the mileage on them....they look new still)
-Iridium plugs
-About 200 miles on a new RPS Max Street clutch/pressure plate/throw-out bearing
-All new oil feed lines, and I cleaned out the old oil returns
-Accessory belts replaced
-All kinds of gaskets/nuts/bolts replaced on the car
-A/C and heat work great, as well as the climate control screen
Paint is in pretty good shape. It's a good a good shine to it, but up close it's got swirl marks/scratches/light hazing in certain parts. I've done my best to clean it up since I got the car 2 1/2 years ago, but the previous owners just didn't take care of it enough I guess. I'm also really picky with things, so some stuff some people might not even notice. The interior is in good shape too. Some wear on the driver's seat, but not anything like you'd expect for a car with 104k miles.
My other question is whether I should buy/install an Emanage. How much more could I get out of the car if I had it in there and tuned? I have a boomslang harness for it, I just haven't gotten around to buying the Blue yet. It's tuned right now just to wastegate pressure (I have the EBC set to "0"). And it's as 'tuned' as the maft will let you
I'm sure there's other things I'm missing, but I'll look over the Word document and post that up here just for reference.


