Assistance identifying a few things... (big pics, sorry)

[My92Stealth]

My cars been apart for a few weeks. When I first put it up and started taking things apart I didn't label a few connections, like an idiot. Fuse box, among other things, has been moved so I can't go by location. I need to know what they are/what they do and where they connect to

This one is part of the bundle that goes to the fuse box:


You can see where this one comes from:


This one is in the same pack as the one that goes to the MAF


Theses are along the line thats usually near the pass. side right at the firewall, just a little farther down the line. (ignore the T one, that goes to the front washer pump)




And heres where I put the fuse box, if anyone is interested

[Jeff V.]

From top to bottom...

#1 Doesn't look like a Mitsubishi connector. Looks like a GM Weatherpak

#2 Fuel pump resistor

#3 Reverse light switch?

#4 Square looking one: Resistor cluster on the firewall. T-shaped one: Windshield washer fluid motor . The two 2-pin ones. One goes to the washer bottle fluid level sensor, the other I think is unoccupied.

If I actually get these all correct, I think it's definitely time for me to move on to something else.

[Monochrome]

http://img.photobucket.com/albums/v325/ ... G_2813.jpg

2 on the bottom are for the washer bottle
1 on the top is for the ECS cap

Not sure what the middle one is for. It looks a lot cleaner than the others...

Jeff is correct on the others

[My92Stealth]

Could the middle one possibly be one of those that just hangs out by the firewall in that small cluster?
Edit:
just for my own reference and for anyone who is curious, number one is the pass, turn signal.